Manual and Machine-mounted Switching 35Khz Ultrasonic Cutter Easy to Cut Thermoplastic Resin Board
Description:
Ultrasonic cutting uses the energy of ultrasonic waves to melt the localized heat of the material to be cut, so that it does not require a sharp edge. The principle of ultrasonic rubber cutting knives is quite different from the traditional pressure cutting.
Ultrasonic cutters can be used to cut thermoplastic resin sheets, sheets, films and laminates, carbon fiber composites, polyethylene fibers, molded articles containing carbon or glass fibers, rubber, vulcanized latex, non-vulcanized latex and food.
Principle:
The principle of an ultrasonic rubber cutter is to convert a 50/60 Hz current into 20, 30 or 40 kHz of electrical energy by means of an ultrasonic generator. The converted high-frequency electrical energy is again converted by the transducer into mechanical vibration of the same frequency, and then the mechanical vibration is transmitted to the cutting blade through a set of amplitude modulator devices that can change the amplitude. The ultrasonic rubber cutting blade vibrates along its length with an amplitude of 10-70 μm and repeats 40,000 times per second (40 kHz) (the vibration of the blade is microscopic and generally difficult to see by the naked eye). The cutting blade then transmits the received vibration energy to the cutting surface of the workpiece to be cut, in which the vibration energy is cut by activating the molecular energy of the rubber molecule and opening the molecular chain.
Specifications:
| Item No | QR-C35CG |
| Power | 800W |
| Generator | Digital generator |
| Frequency | 35KHZ |
| Voltage | 220V or 110V |
| Handle Dimension | Φ40*170 |
| Generator Dimension | 400*195*98mm |
| Gross weight | 8Kg |
| Application | Fabric cutter |
Common problems with traditional cutting:
1. Need a sharp edge to increase the blade requirements
2. Cloth cutting can not be edged, cutting edge is easy to cause chipping and damage
3. Viscous objects are difficult to cut, it is easy to stick to the knife, affecting the cutting effect and efficiency
4. When cutting, it is necessary to apply pressure to the object, which is easy to deform the software or fragile food.
5. Some items will produce a lot of broken particles and debris when cutting, increasing waste.
Manual and Machine-mounted Switching 35Khz Ultrasonic Cutter Easy to Cut Thermoplastic Resin Board
Product Tags:
|
|
Manual And Machine Mounted Switching Ultrasonic Cutting Machine Cut Thermoplastic Resin Board Images
|
